|
Scaleway Signals
Signals, Lever Frames, Wagons and Signs 42 Stratford Way, Boxmoor Hemel Hempstead, Herts HP3 9AS ENGLAND Phone/24hr Answerphone/Fax 01442 214702 International Phone/Answerphone/Fax +44 1442 214702 www.scalewaysignals.com The Miniature Railway Supply Co. Ltd. www.mrsc.org.uk e-mail: sales@mrsc.org.uk |
STEAM LOCOMOTIVE CASTINGS
5", 7 1/4" and 10 1/4" gauge
 |
"Waldenberg" style, 1/4-scale SAND DOME 7 1/4" or 10 1/4" gauge to suit approx 9 7/8" diameter barrel height approx 5 1/8" from top of barrel Can be cast either open or closed-top. CAST ALUMINIUM Our Part No WBSD |
£ 80.00 inc VAT P & P Extra |
 |
"Waldenberg" style, 1/3-scale FALSE STEAM DOME 7 1/4" or 10 1/4" gauge to suit approx 9 7/8" diameter barrel height approx. 6 1/4" from top of barrel Can be cast either open or closed-top. CAST ALUMINIUM Our Part No WBLD |
£ 105.00 inc VAT P & P Extra |
 |
"Waldenberg" style, 1/3-scale CHIMNEY to suit approx 9 7/8" diameter barrel height approx. 10 3/4" from top of barrel 7 1/4" or 10 1/4" gauge CAST ALUMINIUM Our Part No CH4W26 |
P & P Extra |
 |
"Thomas II" style. Cast in aluminium alloy Large NG Beyer-Peacock style SAFETY VALVE COVER 7 1/4" or 10 1/4" gauge to suit approx 11 1/2" diameter barrel height approx. 9 1/2" from top of barrel This is a Large Decorative cover CAST ALUMINIUM Our Part No NGDC |
£ 185.00 inc VAT P& P Extra |
 |
"Talyllyn" style - Cast in aluminium alloy CHIMNEY 5" gauge NG or Small NG 7 1/4" or SG to suit approx 6 1/8" diameter smoke box. height approx. 7 1/4" from top of barrel to just beyond top of "cap". A chucking piece about 1" long included above the "cap". Bore of chimney as cast is 1 1/8" Plain section between cap and base is 1.900" dia approx CAST ALUMINIUM Our Part No CHTR1 |
£ 47.00 inc VAT P & P Extra |
 |
"Tom Rolt" style CHIMNEY 5" gauge NG or Small NG 7 1/4" or SG to suit approx 6 1/8" diameter barrel height approx 6 5/8" from top of barrel to just beyond top of the "cap" A chucking piece about 7/8" long included above the "cap". Bore of chimney as cast is 1 1/8" Plain section between cap and base is 1.900" dia approx at bottom, 2.100" dia at the start of the flare. Maximum dia of the flared top is 3.550" dia CAST ALUMINIUM Our Part No CHTR2 |
£ 52.00 inc VAT P& P Extra |
 |
"Tom Rolt" style SMOKEBOX SADDLE for 5" gauge Narrow Gauge to suit approx 5" diameter barrel The saddle casting is just over 4 1/4" wide as cast, 3 7/16" front to back, 3" from the bottom edge to the lowest point of the saddle. The saddle is curved to suit an approx 5 dia smoke box. Inside is cast hollow for steam pipes etc. CAST ALUMINIUM Our Part No TR3 |
£ 41.00 inc VAT P& P Extra |
 |
General DUMMY LEAF SPRINGS CAST ALUMINIUM 7 1/4"g NARROW GAUGE STYLE |
£ 75.00 per set of 4 inc VAT P & P Extra |
 |
Cast aluminium SADDLE TANK 5" gauge to suit approx. 4 1/4" diameter saddle CAST ALUMINIUM |
£ P.O.A |
To return to our product catagory selection
click here
Contact us on either 01442 214702 or sales@mrsc.org.uk
|
For more information about |
For more information about |
